a) Remove 'ThrustMaster Monitor' from the Startup Items folder of the System Folder
b) Remove 'ThrustMaster Driver' from the Extensions folder of the System Folder
c) Remove 'ThrustMaster Stuff' folder from wherever it may reside (Desktop most likely)
d) Remove 'Tactical Advantage' from wherever it may reside
2) Go to the Apple Menu, down to Control Panels and over to "Extensions Manager". Make sure that 'AppleGuide' is UNCHECKED, if it is Checked, click on the Checkmark to uncheck it. Then you can close the Extensions Manager.
3) Next, restart the computer, holding down the SHIFT key, until the screen says "Welcome to Macintosh: Extensions Off" then you can let go of the SHIFT key.
4) Put the ThrustWare 2.0 floppy disk into the computer and double-click "ThrustWare® 2.0 Installer" then click on the Jets then click "INSTALL" after the installation process it will ask you to Quit, do so, then it will automatically restart your computer, this time you DO NOT need to hold the SHIFT key.
5) Now you will have restarted the new Thrustware 2.0 will be loaded, and now you just need to make sure that the Stroke set that corresponds with your game, matches the game name exactly. Go into the System Folder, then into Preferences, then into "ThrustMaster Stroke Sets" and make sure there is ONLY 1 of a corresponding file, if there is more than one, move the extra files into "Alternate Stroke Sets". Then make sure that the 1 left matches the name of your game Exactly, if not change either the game name or the Stroke Set to match the other.
6) All that is left is to Calibrate the joystick:
a) Go into ThrustWare 2.0 Software
b) Click on the little airplane with red circle around it in the upper right
c) Click on the GREEN light underneath "Calibrate" in the center of the window
d) Follow directions in lower right green window, move joystick around in FULL circles, (also move WCS, and/or RCS in sequences here)
e) Click in the green window where the instructions are, this will SET CALIBRATION, if you click on the green light, you will TURN CALIBRATION OFF, not SET it.
